Aquadyne Filters

Aquadyne Model 2.2

Aquadyne Model 2.2

Model 2.2

For ponds up to 5,000 gallons
Price - $1,731.19

Add this item to your cart
Note: This item cannot be shipped via UPS.
Please see our shipping policy.

Description & Specifications

Dive in and see what the future offers in no hassles, low maintenance filtration. Aquadyne By KOI CAMP Aquariology, The Worlds First Perfect Bead Filtration System. Boosts Total Biological Filtration Capacity Approximately 30%. The Dyna~max forced air cleansing allows thorough washing of bead media through a significant increase in turbulence of media prior to backwashing. The forced air washing, completely breaks up the entire media bed and frees all fine materials that may otherwise remain suspended in the media for further biodegrading. Reduces the water Necessary to backwash by as much as 80%. During a normal non air-assisted backwash cycle, the Model 4.4 would typically require between 200 and 300 gallons of water to effectively clean the filter of waste. With the Dyna~max system you can backwash the same filter with as little as 60 gallons of water. This is most desirable for those wishing to install a larger filter on a pond of a lesser volume than the filter is rated for, because very little make-up water has to be added to the pond after a backwash cycle and a much larger fish load can be maintained in a smaller environment, while greatly entending the time between backwashing. <\P>

  • Support Up To 120# of Fish
  • Avg. Filtration Flow: 1000 - 4000 Gph
  • Min. Backwash Flow: 4000 Gph
  • Sug. Pump: 1.5Hp 2spd. or equiv.
  • Dynamax Air Assist Option: Compatible
  • 2.2 cubic feet of bead media
  • Diameter 24" Height 42"
  • Maximum Pressure: 50 PSI
  • Average footprint with pump and UV sterilizer: 24"D x 40"W
  • Avg. water to Backwash 250 Gal.
  • Includes 3 Quick Disconnect Unions with Male Adaptors
  • 1.5" plumbing on all ports
Again, as with the Model 1.1, The Model 2.2 is an excellent choice for a bead filtration system within a given price range for larger ponds. The Model 2.2-B by far exceeds the performance of the standard 2.2 at a slightly higher initial cost at the benefit of turbo-charging the effeciency of your filter. Carefully compare both filters performance data. Here again, we now fit the Standard 2.2 also with the necessary bulkheads for a later simple backyard conversion to the Model 2.2-B. The standard 2.2 can also be converted to a 2.2-B yourself with no special tools. If you are relatively sure that you will likely convert your filter to a Dynamax system at a later date, we advise that you not wait and purchase the appropriate model initially. By the time you decide to convert, you could have had it running from day one with no concern of conversion.
A note on Aquadyne Pricing
If you find a better advertised price or a price that allows you to have a lower total cost, (even if the better advertised price includes incentives), call and let us know. If we can match or beat the other advertised price (including incentives) without losing money, we will. You have nothing to lose. Surf and then call us at 1-800-531-4535. PondExpo.com is located about 30 miles from the Aquadyne factory. Just let us know how we can help you.

You might also want


Pentair Lube-Free Valves
MORE

Unions
MORE

Flexible PVC Pipe
MORE